Ce post est ancien de plus d'un an et pourrait être obsolète.

The Raspberry Pi 3 Model B is here and we are delighted to announce the immediate availability of Ubuntu MATE 15.10 for the Raspberry Pi 3 Model B!

Many thanks to Ben Nuttall, Simon West, Liz Upton and Phil Elwell from the Raspberry Pi Foundation for providing Martin Wimpress with a Raspberry Pi 3 and engineering assistance over the weekend.

Ubuntu MATE for the Raspberry Pi 3

The Raspberry Pi 3 Model B is the same form factor as the Raspberry Pi B+ and Raspberry Pi 2 Model B, the RAM remains 1GB and the USB and wired Ethernet port arrangement and configuration are unchanged.

Here is what is new to the Raspberry Pi 3:

  • Improved performance thanks to a Broadcom BCM2837 64-bit Quad Core ARM Cortex-A53 CPU running at 1.2GHz.
  • Integrated 802.11 b/g/n Wireless LAN (BCM43438) accessed via SDIO using the Arasan MMC controller.
    • This requires that the Broadcom MMC controller is used for the SD card using the relatively new and recently revamped bcm2835-sdhost driver.
  • Integrated Bluetooth 4.1 (Classic & Low Energy) (BCM43438 again) is presented as a modem via a serial UART (two-wire - no hardware flow control) with the BlueZ software stack running in H4 mode.
  • Improved power management with a 2.5 Amp power supply.
  • A new chip antenna is where status LEDs were previously located. The status LEDs are still on the board, right next to the microSD card slot.

The Ubuntu MATE image we’ve prepared supports the integrated Wifi on the Raspberry Pi 3 but support for the integrated Raspberry Pi 3 Bluetooth is still in progress and we hope to enable full support via an update very soon.

Download

Download Ubuntu MATE for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B.

Download

The image will fit on a 4GB (or larger) microSHDC card, is pre-configured to enable access to Raspberry Pi 2 and Raspberry Pi 3 hardware devices such as GPIO, SPI, I2C etc and include replacement memcpy and memset functionality for the Raspberry Pi to optimise performance. We have done what we can to optimise the builds for the Raspberry Pi 2 and Raspberry Pi 3 but microSDHC I/O throughput can be a bottleneck so we recommend that you use a Class 6 or Class 10 microSDHC card.

The image is built from the regular Ubuntu armhf base, not the new Snappy Ubuntu, which means that the installation procedure for applications is the same as that for the regular desktop versions ie using apt-get. The images will only work in a Raspberry Pi 2 Model B and Raspberry Pi 3 Model B

The first time you boot one of the desktop images it will run through a setup wizard where you can create your own user account and configure your regional settings. The first boot is quite slow but, once the first boot configuration is complete, subsequent boots are much quicker.

Changes

These are the changes that we’ve made since the 15.10.1 release:

2016-02-27 - 15.10.3 for Raspbery Pi 2 and Raspberry Pi 3

  • Added support for Raspberry Pi 3 integrated Wifi.
  • Updated BlueZ 5.35 with patch to support the Raspberry Pi 3 integrated Bluetooth.
    • Support for the integrated Raspberry Pi 3 Bluetooth is not working but we hope to have an update that addresses this soon.

2016-02-26 - 15.10.2 for Raspbery Pi 2 and Raspberry Pi 3 (internal testing build)

  • Added support for Raspberry Pi 3 Model B.
    • No Raspberry Pi 3 integrated Wifi or Bluetooth support.
  • Updated to Linux 4.1.18.
  • Updated all packages to the current version in the Ubuntu 15.10 archive.
  • Fixed an issue where the SSH host keys were not correctly regenerated on first boot.

Commentaires


Dernières


Archives

Avril 2021
Octobre 2020
Avril 2020
Octobre 2019
Avril 2019
Mars 2019
Octobre 2018
Septembre 2018
Avril 2018
Mars 2018
Octobre 2017
Septembre 2017
Août 2017
Juillet 2017
Avril 2017
Mars 2017
Février 2017
Janvier 2017
Octobre 2016
Septembre 2016
Août 2016
Juillet 2016
Juin 2016
Mai 2016
Avril 2016
Mars 2016
Février 2016
Janvier 2016
Octobre 2015
Septembre 2015
Août 2015
Juillet 2015
Juin 2015
Mai 2015
Avril 2015
Mars 2015
Février 2015
Janvier 2015
Décembre 2014
Novembre 2014
Octobre 2014
Septembre 2014
Août 2014
Juillet 2014
Juin 2014