Этому посту больше года и, возможно, он устарел.

An Ubuntu MATE 16.04.2 image for the Raspberry Pi 2 and Raspberry Pi 3 is now available for download.

Download

Download Ubuntu MATE for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B.

Download

The image for the Raspberry Pi 2 and Raspberry Pi 3 based on the regular Ubuntu armhf base, not the new Ubuntu “Snappy” Core, which means that the installation procedure for applications uses the traditional tools, ie apt-get.

We have done what we can to optimise the build for the Raspberry Pi 2 and Raspberry Pi 3, you can comfortably use applications such as LibreOffice, which in fact is a joy to use :-) But the microSDHC I/O throughput is a bottleneck so we highly recommend that you use a Class 6 or Class 10 microSDHC card. Ubuntu MATE 16.04 also fully support the built-in Bluetooth and Wifi on the Raspberry Pi 3 and also feature **hardware accelerated video playback in VLC and hardware accelerated decoding and encoding in ffmpeg

Ubuntu MATE 16.04.2 running on the Raspberry Pi 3 Ubuntu MATE 16.04.2 running on the Raspberry Pi 3

Changes

These are the changes since Ubuntu MATE 16.04 for the Raspberry Pi was release.

  • Performance optimised.
    • Added automated first boot partition resizing.
    • Optimised partition offset calculations
    • Optimised filesystem features.
    • Disabled unnecessary services to reduce CPU cycles and RAM requirements.
  • Forked and adapted raspi-config to Ubuntu.
    • Added pi-top brightness and power-off support.
  • Backported MATE Desktop 1.16.1.
  • Backported BlueZ 5.41.
  • Backported ffmpeg 3.2 including Raspberry Pi hardware acceleration for MMAL decoding and OMX encoding.
  • Backported i2c-tools and python-smbus 3.1.2.
  • Updated raspberrypi-firmware to 1.20161215-1.
  • Updated pi-bluetooth to 0.1.2 including failsafe systemd units.
  • Updated gpiozero to 1.3.1. A simple API for controlling devices attached to the GPIO pins.
  • Updated omxplayer to 0.3.7-git20160923-dfea8c9.
  • Updated nuscratch to 20160915+2.
  • Updated picamera to 1.12. Pure Python interface to the Raspberry Pi’s camera module.
  • Updated pigpio to 1.130. Library for Raspberry Pi GPIO control.
  • Updated python-sense-hat to 2.2.0. Sense HAT python.
  • Updated raspberrypi-sys-mods to 20170208, which completely replaces raspberrypi-general-mods
  • Updated raspi-gpio to 0.20170105. Dump the state of the BCM270x GPIOs.
  • Updated rpi.gpio to 0.6.3-1. Python GPIO module for Raspberry Pi.
  • Updated rtimulib to 7.2.1-3. Versatile C++ and Python 9-dof, 10-dof and 11-dof IMU library.
  • Updated sonic-pi to 2.10.0.
  • Updated xserver-xorg-video-fbturbo to 1.20161111~122359.
  • Updated Xorg via the LTS Enablement Stack.
  • Added cap1xxx; A python library designed to drive various Microchip CAP1xxx touch ICs.
  • Added drumhat; A python library designed to control Drum HAT.
  • Added envirophat; A python library designed to control Enviro pHAT.
  • Added explorerhat; A python library designed to control the Explorer HAT and pHAT.
  • Added microdotphat; A python library designed to control Micro Dot pHAT.
  • Added mote; A python library designed to control Mote.
  • Added motephat; A python library designed to control Mote pHAT.
  • Added pantilthat; A python library designed to control Pan-Tilt HAT.
  • Added pianohat; A python library designed to control Piano HAT.
  • Added piglow; A python library designed to drive Piglow.
  • Added rainbowhat; A python library designed to control Rainbow HAT.
  • Added scrollphat; A python library designed to control Scroll pHAT.
  • Added sense-emu; A client library for the Raspberry Pi Sense HAT emulator.
  • Added sn3218; A python library to help control the SN3218 18-channel PWM LED driver.
  • Added st7036; A python library to help control the ST7036 LCD driver.
  • Fixed first boot configuration. Ubiquity now prompts to join available WiFi networks.
  • Disabled SSH by default.
    • SSH can be enabled via raspbi-config or creating a file named ssh in the /boot partition.
    • sshguard is also automatically enabled when you enable SSH.
  • Reduced the image size to 5GB, down from 8GB.

Known Issues

  • Ubuntu MATE 16.04.2 for the Raspberry Pi is not snap compatible.
    • We hope to have snapd compatibility in Ubuntu MATE 17.04 for the Raspberry Pi.
    • The 32-bit and 64-bit PC version of Ubuntu MATE 16.04, or newer, are snapd compatible.
  • Upon completion of the first boot setup WiFi doesn’t work, at all. Reboot and WiFi will be available.

More Information

Find out more about Ubuntu MATE for Raspberry Pi 2 Model B and Raspberry Pi 3 Model B.

Read more

Комментарии


Актуальное


Архивы

Октябрь 2020
Апрель 2020
Октябрь 2019
Апрель 2019
Март 2019
Октябрь 2018
Сентябрь 2018
Апрель 2018
Март 2018
Октябрь 2017
Сентябрь 2017
Август 2017
Июль 2017
Апрель 2017
Март 2017
Февраль 2017
Январь 2017
Октябрь 2016
Сентябрь 2016
Август 2016
Июль 2016
Июнь 2016
Май 2016
Апрель 2016
Март 2016
Февраль 2016
Январь 2016
Октябрь 2015
Сентябрь 2015
Август 2015
Июль 2015
Июнь 2015
Май 2015
Апрель 2015
Март 2015
Февраль 2015
Январь 2015
Декабрь 2014
Ноябрь 2014
Октябрь 2014
Сентябрь 2014
Август 2014
Июль 2014
Июнь 2014